Canon 1000 Service Manual page 279

Adjusting the Pressure of the Paper Deck
Separation/Feeding Roller
If pick-up faults occur or double-feeding
occurs frequently, change the position of the spring
hooked on the retard stay.
Spring
COPYRIGHT © 2001 CANON INC.
Retard stay
Figure 4-319A
CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
4. MECHANICAL SYSTEM
[1] If pick-up faults (failure) occur, increase the
pressure.
[2] If double-feeding occurs, decrease the
pressure.
Decrease the pressure.
Standard (A move to the next hole
results in a pressure change of about 50 g).
Increase the pressure.
4-25