Checking The Developing Assembly - Canon iR105 Service Manual

2.6 Checking the Developing Assembly

No.
1 Open the manual feed tray unit [1], and
remove the screw [2] from the door tape
[3].
Do not open the manual feed
tray unit too wide; otherwise,
the door tape may tear.
2 Take out the developing assembly from
the package that comes with the machine.
Turn the developing cylinder by hand to
check it for scratches.
3 Holding the developing assembly [1] as
shown, mount it to the machine.
When mounting the
developing assembly, fit it
from a high position, and
take care not to bring the
developing cylinder into
contact with the plate of the
developing assembly base.
Connect the 2 connectors [1].
COPYRIGHT© 2001 CANON INC.
Work
2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001
CHAPTER 4 INSTALLATION
Checks/remarks
[2] [3]
F04-206-01
F04-206-02
[1]
F04-206-03
[1]
[1]
4-19