Installing The Process Unit - Canon 1000 Service Manual

3. Installing the Process Unit

1) Remove all developing assemblies, and install the protection sheet [1] to each photosensitive drum.
• Do not touch the drum contact
face.
• Dry wipe it with lint-free paper
before use.
M/C/Bk
photosensitive
drum
Check to see that
the edge of white
paper is bent down.
2) Set the developing assembly [2] in the process unit.
COPYRIGHT © 2001 CANON INC.
[1]
Plastic film
Figure 4-910A
Figure 4-911A
CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
4. MECHANICAL SYSTEM
[1]
Y photosensitive drum
[2]
4-83