Hopper Assembly; Removing The Hopper Assembly - Canon 1000 Service Manual

4. MECHANICAL SYSTEM
VII.HOPPER SYSTEM
A. Hopper Assembly

1. Removing the Hopper Assembly

1) Remove the hopper left/right cover [1] (screw
[2]), and remove the two fixing screws [3] of
the hopper assembly.
[1]
[2]
Figure 4-701A
2) Hold the left and right grips [4], and while
pulling to the front, lift the hopper assembly.
[4]
Figure 4-702A
4-72
COPYRIGHT © 2001 CANON INC.
[3]
[2]
[1]
3) Remove the screw [5] from the right grip
assembly.
4) Install the hopper middle position metal fixing
[4]
[6] (left, right).
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
Make a visual check to be sure that
the locking mechanism under the
hopper assembly is securely en-
gaged.
Figure 4-703A
[6]
Figure 4-704A
[5]