Special Tools - Canon 1000 Service Manual

APPENDIX
H. SPECIAL TOOLS
You will need the following special tools in addition to the standard tools set to service the machine.
No. Tool Name
1 Laser power
checker
2 Digital
multimeter
3 Door switch
4 Stop ring pliers
end
replacement
5 Environment
sensor checker
A-82
COPYRIGHT © 2001 CANON INC.
Tool No.
FY9-4013
CK-0436
TKN-0093 Point to use
CK-0426
TKN-0456
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
Shape Rank* Remarks
A Use it when adjusting
the intensity of the
laser from the laser
unit; to be use in
combination with a
digital multimeter.
A Use it when adjusting
the intensity of the
laser from the laser
unit; to be use in
combination with the
laser power checker to
adjust the intensity of
the laser from the laser
unit.
A Do not remove the
transfer assembly
frame while the door
switch is on.
B Use it when removing
the grip stop ring; 4 to
9 mm.
B Use it when checking
the environment
sensor.