Canon 1000 Service Manual page 383

Step
10 Remove the four primary charging
assemblies.
After removal, place each
primary charging assembly
so that its grid side faces up.
11 Remove the four photosensitive drum
positioning knobs.
The knobs have a two-layer
construction. To remove, turn the small
knob at the center counterclockwise.
12 Remove the two screws from the
process unit.
COPYRIGHT © 2001 CANON INC.
Work
CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
5. INSTALLATION
Remarks
Primary charging
assembly
Positioning knob
Screw
Process unit Screw
5-9