Canon 1000 Service Manual page 390

5. INSTALLATION
Step
6 Install the retaining fixing.
7 Release the lock of the hopper
assembly, and lower the hopper
assembly as far down as the hopper
assembly retaining fixing; then, remove
the sheet from the toner supply mouth
(for all colors).
Pull it down at an angle to facilitate
removal.
8 Remove the two laser shutter opening
tools installed in step 33.
9 Holding the left and right grips, lift the
hopper assembly while pulling it to the
front.
10 Remove the two hopper fixings, and
check to make sure that the lock is
released; then, set the hopper
assembly into place.
Thereafter, fix it in place with two fixing
screws.
11 Press STIR-4
Wait until stirring ends. (about 1 min)
DISP COUNTER
ADJUST
FUNC
OPTION
TEST
12 Press INIT-7
The initial ATR data will be read. Wait until the operation ends automatically. (about 1 min)
DISP COUNTER
ADJUST
FUNC
OPTION
TEST
5-16
COPYRIGHT © 2001 CANON INC.
Work
.
<M>
INSTALL
INIT-Y
0
SINIT-Y
0
STIR-Y
0
SPLY-Y
0
.
<M> INSTALL
INIT-Y
0
SINIT-Y
0
STIR-Y
0
SPLY-Y
0
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
Sheet
<S> <R>
1/4
INIT-M INIT-C
0 0
SINIT-M SINIT-C
0 0
STIR-M STIR-C
0 0
SPLY-M SPLY-C
0 0
<S> 1/4 <R>
INIT-M INIT-C
0 0
SINIT-M SINIT-C
0 0
STIR-M STIR-C
0 0
SPLY-M SPLY-C
0 0
Remarks
<P> <F>
INIT-3 INIT-7
0 0
SINIT-K SINIT-4
0 0
STIR-K STIR-4
0 0
SPLY-K SPLY-4
0
0
<P> <F>
INIT-3 INIT-7
0 0
SINIT-K SINIT-4
0 0
STIR-K STIR-4
0 0
SPLY-K SPLY-4
0 0