Remote (Machine Settings With Ipu In Use) - Canon 1000 Service Manual

7. TROUBLESHOOTING IMAGE FAULTS/MALFUNCTIONS

3. REMOTE (machine settings with IPU in use)

DISP COUNTER
ADJUST
FUNC
OPTION
Item
REMOTE
FREE-SZ
Details of Settings
Setting
REMOTE = 0, 1
2, 3
4
5
6
7
Note 1:
You must enter the appropriate value whenever you have replaced the reader controller PCB or initial-
ized a RAM; record any new values on the service label for this purpose.
COPYRIGHT © 2001 CANON INC.
7-290
<M> REMOTE <S>
REMOTE
0
FREE-SZ
0
Description
Make the settings shown in A and B (table
below):
A: Use it to specify whether the Call key should
have a remote function. If it is not used as a
remote key, a command from the IPU starts
remote state and then local state after execu-
tion.
B: Use it to specify whether copying modes set
in local state should be maintained when
moving from local state to remote state.
Use it to enable printing on free-size paper from
the PS-XJ1000.
If set to '1', printing on free-size paper is ena-
bled.
A
Keep as Call key.
Keep as Call key.
Use as Remote key.
Use as Remote key.
Use as Remote key.
Use as Remote key.
<R>
READY
B
Retain
Do not retain
Retain
Retain
Do not retain
Do not retain
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
<P> <F>
READY
Remarks
Settings: 0~7
Standard: 0
Standard:0