Canon 1000 Service Manual page 382

5. INSTALLATION
Step
5 Perform the same steps for the M, C,
and Bk toners as for the Y toner.
Do not dispose of the toner
bottle in fire; it may tear open
or explode.
6 Open the right cover, and remove the
hopper assembly right cover and the
left cover (1 screw each).
7 Remove the two fixing screws from the
hopper assembly.
8 Holding both left and right grips, pull the
hopper assembly to the front and then
lift it. (It will be locked when lifted to the
topmost position.)
Check to make sure that the
hopper assembly is se-
curely locked in position by
the naked eye.
9 • Shift down the lever of the transfer
unit, and release the transfer belt from
the photosensitive drum.
• Slide out the transfer unit, and remove
the transfer unit cover (2 mounting
screws).
• Put the transfer unit back into its
original position. (Keep the releasing
lever released.)
5-8
COPYRIGHT © 2001 CANON INC.
Work
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks
Left cover
Screw
Fixing screws
Grip
Transfer unit
Screw
Right cover
Grip
Lever