5. INSTALLATION
IV. INSTALLING THE ORIGINAL TRAY
Installing on the Right
Step
1
Peel the four face stickers from the
copier's right side, and fit the two
stepped screws.
2
Fit the original tray over the stepped
screws; then, fix the tray in position with
two screws.
Installing on the Left
Step
1
Peel the four face stickers from the
copier's right side, and fit the two
stepped screws.
2
Fit the original tray over the stepped
screws; then, fix the tray in position with
two screws.
5-38
COPYRIGHT © 2001 CANON INC.
Work
Work
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks
Original tray
Stepped screws
Remarks
Original tray
Stepped screws
Screws
Screws