Removing The M Image Position Correcting Mirror Unit; Removing The C/Bk Image Position Correcting Mirror Unit - Canon 1000 Service Manual

4. MECHANICAL SYSTEM
11) Shift the scanner unit to the left.
Figure 4-616B
5. Removing the M Image Position
Correcting Mirror Unit
1) Make preparations for parts associated with
the laser unit (See chapter 4. VI. LASER
SYSTEM, A-1. Making Preparation for Laser
Unit-Related Parts).
2) Remove the laser cooling fan.
3) Disconnect the three connectors [1], and
remove the two screws [2]; then, remove the
mirror cover (right) [3].
[1]
[2]
Figure 4-617B
4) As in the case of the Y image position
correcting mirror unit, remove the three
screws to remove the M image position
correcting mirror unit.
4-68
COPYRIGHT © 2001 CANON INC.
[1] [3]
[2]
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
6. Removing the C/Bk Image Position
Correcting Mirror Unit
1) Shift the scanner unit (See chapter 4. V.
EXPOSURE SYSTEM, B-4. Shifting the
Scanner Unit).
2) Remove the two screws [1], and remove the
image position correcting mirror cover (left)
[2].
Figure 4-618B
3) Remove each of the image position correcting
mirror units (See chapter 4. VI. LASER
SYSTEM, B-5. Removing the Y/M Image
Position Correcting Mirror Unit).
[2]
[1]