Canon 1000 Service Manual page 400

5. INSTALLATION
Step
8 Install the harness cover to the rear
right cover. (2 mounting screws)
• For a non-200V model, skip this step.
9 Open the cardboard box of the paper
deck, and remove the fixing members
and the fixing tape.
As many as five fixing
screws for the paper deck
are included. Take them out
in advance.
10 Place the paper deck on its side, and
turn the paper deck adjuster (1 each at
front and rear) so that the distance d is
about 85 mm.
11 Remove the metal fixing. (2 mounting
screws)
5-26
COPYRIGHT © 2001 CANON INC.
Work
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks
Harness
cover
Screws
d
85mm
Metal fixing
Screws