Using Separation Sheets - Canon oce 31x5e Daily Maintenance

Using separation sheets

You can copy certain pages onto colored or other material using the
'Separation sheet' function within the 'Paper' section.
report of 12 pages
new chapters begin on
pages 5, 8 and 10
[24] Report with separation sheets
When you make double-sided copies, both sides of the separation sheet will be
printed. Each side corresponds to a page in the set of originals. If you select
'Separation sheet' for an even page, the previous page will also be selected; for
an odd page the next one will be selected. If one or both sides have to remain
blank, use the 'Blank page' function (see 'Specifying blank pages' on
page 53), if desired in combination with additional blank original pages.
If you are copying two originals on one page side (see page 66) in combination
with double-sided copying, four originals will be used to fill both sides of one
sheet. Be sure to program, keeping the four page layout in mind when using
separation sheets in combination with these settings.
M
Copying reports with separation sheets
Before you start programming the copier, check which pages of your original
1
are to be defined as separation sheets.
Indicate whether the originals are 1-sided or 2-sided and choose 1-sided or
2
2-sided copies using the 'Original' and 'Copy' function buttons.
Open the 'Paper' section by pressing the section button.
3
Select 'Page settings'.
4
The pages of the report will be shown in the graphic display.
50 Océ 31x5E Copy jobs & daily maintenance
12
11
10
9
8
7
6
5
4
3
2
1
11
10
9
8
7
6
5
4
3
2
1
result:
chapters clearly recognizable
12