Removing The Transfer Charging Assembly - Canon NP6330 Service Manual

2. Removing the Transfer Charging Assembly

1) Remove the screw
remove the transfer charging assembly
3. Stringing the Primary/Transfer Charging Wire
a. Primary Charging Assembly
1) Remove the primary charging assembly.
2) Remove the four tension springs
.
3) Remove the lid
4) Go to step 5) under b. "Transfer Charging Assembly."
COPYRIGHT © 1997 CANON INC.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
, and remove the transfer charging assembly cover
Figure 4-324
(2 at front, 2 at rear), and remove the grid plate
(both front and rear).
Figure 4-325
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 IMAGE FORMATION SYSTEM
by pulling it to the front.
; then,
4-37