4.
Removing the Feeding Roller
1) Remove the pickup roller, and remove the
stop ring.
2) Remove the two screws [1], and detach
the manual feed tray guide [2].
3) Remove the stop ring [3] from the front of
the feeding roller assembly, and move the
feeding roller assembly [5] together with
the timing belt [4] to detach.
5.
Orientation of the Feeding Roller
When mounting the feeding roller [6] to
the manual feed tray pickup assembly, be sure
that the belt pulley [7] and the round marking
[8] are toward the copier's front.
COPYRIGHT © 1999 CANON INC.
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 7 PICK-UP/FEEDING SYSTEM
[1]
Figure 7-A807
[5]
[4]
[3]
Figure 7-A808
[8]
[7]
[6]
Figure 7-A809
[2]
[1]
(front of the
copier)
7-47