Points To Note When Installing The Pick-Up Roller; Removing The Feeding Roller - Canon NP6330 Service Manual

4. Points to Note When Installing the Pick-Up Roller

When installing the pick-up roller
marking on the rubber portion is toward the front of the copier.
The pick-up rollers are identified by color as follows:
If brass, use it for the front.
If silver, use it for the rear.
Note:
Do not separate the rubber portion of the pick-up roller from the collar.

5. Removing the Feeding Roller

1) Remove the pick-up roller.
2) Remove the pick-up roller from the front and the rear.
3) Remove the screw
roller arm .
COPYRIGHT © 1997 CANON INC.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
to the pick-up assembly, be sure that the round
Collar
Figure 5-707
, and remove the pick-up roller arm bushing
Figure 5-708
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 5 PICK-UP/FEEDING SYSTEM
(front of copier)
and the pick-up
5-49