Shift Motor - Canon Finisher-AB1 Service Manual

Chapter 4
5) Remove the tray A/B lift motor.
- 2 screws [2]
- 1 belt [3]
[3]
F-4-46

4.3.5 Shift Motor

4.3.5.1 Before Removing the Shift Motor
1) Disconnect the machine from the host machine
side.
2) Remove the upper rear cover (right). (page 4-
2)Reference[Removing the Upper Rear Cover
(right)]
3) Remove the upper rear cover (left). (page 4-
3)Reference[Removing the Upper Rear Cover
(left)]
4) Remove the middle rear cover. (page 4-
6)Reference[Removing the Middle Rear Cover]
5) Remove the upper cover unit. (page 4-
3)Reference[Removing the Upper Cover Unit]
6) Remove the inside cover (upper). (page 4-
6)Reference[Removing the Inside Cover (upper)]
4.3.5.2 Removing the Shift Motor
1) Remove the latch base support plate [1].
- 2 screws [2]
[1]
F-4-47
4-12
[1]
[2]
0015-2305
0015-2306
[2]
2) Remove the transport stay (upper right) [1].
- 4 screws [2]
[2]
[1]
F-4-48
3) Remove the fan unit [1].
- 1 connector [2]
- 2 screws [3]
[3]
F-4-49
[2]
[2]
[1]