The Amount Of Sending Of A Saddle Disengage Roller Adjustment - Canon Finisher-AB1 Service Manual

8) Press switch SW385 [1] to complete the
adjustment.
SW382
SW381
SW383 SW384 SW385
(-) (+) ENTER
F-5-163
5.3.2.23 The amount of sending of a
saddle disengage roller adjustment
This adjustment is to be carried out when there is a
noticeable misalignment in the folding position or
stapling position.
<MEMO>
This operation adjusts the size of the gap between the
disengage roller and the paper, and improved paper
feed performance in the saddle assembly.
[1]
F-5-164
[1]
0016-7248
M101
Details of the adjustment method are as described
below.
1) Turn the finisher power ON.
2) Turn on the copier main unit power switch and put
the copier in standby.
3) Open the front door and insert the door switch
actuator into the door switch [1].
F-5-165
4) Remove the screw [2] to detach the switch cover
[1].
[2]
F-5-166
Chapter 5
[1]
5-49
[1]