Connecting With Machine - Canon Finisher-AB1 Service Manual

Chapter 2
4) Remove 1 screw [1] on the rear latch retainer and
pull the hinge [2] forward and downward.
[2]

2.2.3 Connecting with Machine

Check the power on the host machine is surely
turned off and the power supply cable is
unplugged.
1) Sub-Station Upper Left Cover [1] and rear [2]
latch plates.
- 4 screws (RS tight; M4X10) [3]
Confirm the mark engraved on each latch plate
when attaching.
Front [1]: F
Rear [2]: R
2-4
[1]
F-2-4
R
[2]
[3]
2) Fit the positioning pin [1].
- 2 screws (RS tight; M4X10) [2]
0016-0903
[1]
[2]
F
[2] [1]
[1]
[3]
F-2-5
F-2-6