Motor; Removing The Stapler Shift Motor (M7); Removing The Assist Motor (M5) - Canon Inner Finisher-L1 Service Manual

Motor

Removing the Stapler Shift
Motor (M7)
■ Preparation
1. Remove this machine from the host machine.
"Removing this Machine from the Host Machine" on
page 43
2. Remove the Front Cover
Cover Unit" on page 76
3. Remove the Rear Cover."Removing the Rear Cover"
on page 76
4. Remove the Upper Feed Guide
Upper Feed Guide Unit" on page 80
5. Remove the Tray Guide
Guide Cover" on page 78
6. Remove the Staple-free Staple
Staple-free Staple Unit" on page 86
7. Remove the Processing Tray
Processing Tray Unit" on page 81
■ Procedure
1. Remove the Stapler Shift Motor [1].
• 2 Screws [2]
• 1 Connector [3]
2x
1x
Unit."Removing the Front
Unit."Removing the
Cover."Removing the Tray
Unit."Removing the
Unit."Removing the
[3]
[2]
[2]
[1]
4. Parts Replacement and Cleaning
Removing the Assist Motor
(M5)
■ Preparation
1. Remove this machine from the host machine.
"Removing this Machine from the Host Machine" on
page 43
2. Remove the Front Cover
Cover Unit" on page 76
3. Remove the Rear
on page 76
4. Remove the Upper Feed Guide
Upper Feed Guide Unit" on page 80
5. Remove the Staple-free Staple
Staple-free Staple Unit" on page 86
6. Remove the Tray Guide
Guide Cover" on page 78
7. Remove the Processing Tray
Processing Tray Unit" on page 81
■ Preparation
1. Remove the Assist Motor Assembly [1].
• 1 Connector [2]
• 2 Screws [3]
• 1 Spring [4]
• 1 Belt [5]
1x
2x
89
Unit."Removing the Front
Cover."Removing the Rear Cover"
Unit."Removing the
Unit."Removing the
Cover."Removing the Tray
Unit."Removing the
[3]
[1]
[5]
[4]
[3]
[2]