Canon Finisher-AB1 Service Manual page 399

<Memo>
This adjustment works for the upper tray only. The
stacking limit of the lower tray cannot be cancelled.
The table below shows the loading capacity of the
lower tray when the stacking limit has been
cancelled.
Paper type
Under normal
conditions
Plain paper (extra
1,000 sheets
long size)
Coated paper
1,500 sheets
(half size)
Coated paper
1,000 sheets
(large size)
Details of the adjustment procedure are provided
below.
1) Turn on the finisher.
2) Turn on the host machine so that the machine will
be in a standby state.
3) Open the front door, and insert the door switch
actuator into the door switch [1].
F-5-169
4) Remove the screw [2], and detach the switch
cover [1].
T-5-7
Loading capacity
When the
stacking limit is
cancelled
1,500 sheets
3,000 sheets
1,500 sheets
5) Set the DIP switch SW382 [1] on the switch PCB
as follows:
SW382
SW381
SW383
(-)
[1]
[1]
[2]
F-5-170
[1]
SW384 SW385
(+) ENTER
F-5-171
Chapter 5
5-51