Pressing Unit - Canon Finisher-AB1 Service Manual

2) Mark the current position [1] before detaching the
stop plate.
[1]
F-4-143
3) Remove the stop plate [1].
- 3 screws [2]
- 1 stop plate fixing plate [3]
[1]
[2]
F-4-144
4) When fitting a new stop plate, secure it in place in
keeping with the marking made in step 2).
[1]
[3]

4.4.14 Pressing Unit

4.4.14.1 Before Removing the Press Unit
1) Open the front cover.
2) Slide out the saddle unit.
[1]
F-4-145
3) Pull out an auxiliary caster [1] in the direction of
an arrow [A]. Then, a saddle unit is pulled out in
the direction of an arrow [B].
[B]
F-4-146
Chapter 4
0015-2186
[A]
[1]
4-37