Canon Finisher-AB1 Service Manual page 85

4) Disconnect the 2 connectors [1], and remove the 2
screws [2].
[1]
[2]
F-4-50
5) Remove the detection drive assembly [1].
- 2 screws [2]
[1]
[2]
F-4-51
6) Remove the cable retainer [1], and disconnect the
connector [2]; then, free the cable [3] from the
cable guide [4].
[1]
F-4-52
7) Insert a screwdriver [1] into the hole [1].
F-4-53
8) Loosen the screw [1], and tighten the screw while
the tension is removed.
[1] [2]
F-4-54
Chapter 4
[4]
[2]
[3]
[1]
4-13