Rear Middle Cover; Inside Cover (Upper) - Canon Finisher-AB1 Service Manual

Chapter 4
4.2.6.3 Mounting the Stacking Wall (lower)
1) Turn the shutter drive shaft [2] so that the shutter
drive roll [1] is directly below.
[1]
F-4-20
2) Mount the stacking wall (lower) so that the shutter
drive roll [1] is visible through the hole in the
stacking wall.
F-4-21
4-6

4.2.7 Rear Middle Cover

4.2.7.1 Removing the Middle Rear Cover
0015-2115
1) Remove the middle rear cover [1].
- 4 screws [2]
[2]
[2]

4.2.8 Inside Cover (Upper)

4.2.8.1 Before Removing the Inside Cover
(upper)
1) Open the front cover.
2) Open the upper cover unit.
4.2.8.2 Removing the Inside Cover (upper)
1) Remove the inside cover (upper) [1].
- 1 knob [1]
[1]
- 8 screws [2]
[1]
[2]
[1]
F-4-22
[3]
[3]
F-4-23
0015-2118
[2]
0015-2119
0015-2120