No.2 Flapper; Thrust Unit - Canon Finisher-AB1 Service Manual

9) Free the arm [1] from the hole [1]; then, shift it
away in the direction of the arrow.
[1]
F-4-134
10) Fit the No. 1 paper deflecting plate [1] into the
hole [2].
[1]
F-4-135
11) Remove the No. 1 paper deflecting plate [1] in
[2]

4.4.11 No.2 Flapper

4.4.11.1 Removing the No. 2 Paper
Remove the No. 2 paper deflecting plate in the same
[2]
way you removed the No.1 paper deflecting plate.
(page 4-33)Reference[Removing the No. 1 Paper
Deflecting Plate]

4.4.12 Thrust Unit

4.4.12.1 Removing the Stop Unit
1) Open the front cover.
2) Slide out the saddle unit.
3) Remove the saddle stitcher controller PCB cover
[2]
the direction of the arrow.
[1]
F-4-136
Deflecting Plate
[1].
- 6 screws [2]
F-4-137
Chapter 4
0015-2182
0015-2183
[1]
[2]
4-35