Attaching The Labels Etc; Affixing Labels - Canon Finisher-AB1 Service Manual

Chapter 2

2.4 Attaching the Labels etc.

2.4.1 Affixing Labels

1) Open the front cover of the finisher.
2) Affix the Guide map label [1] to the inside of the
front cover. (Figure shows the saddle finisher).
M_ _ ________ ___ _________ ___________ __ _____ ____________.
P_ _ ______ ___ __________ _____ ____________ ___ _____________.
J_ ____ ____________ ___ ________ _____ ___ _______ _____________ _________.
P____ ___ ________ __ __ _________ _____ ___ ___________ ___ __________.
P_______ _______ ____ _____ _ ________ ____ ______________.
P___ ___ ________ __ _____ ___________ ___ _____ __ _____________.
_______________________________.
_______________________________.
_____________________________________.
___________________________________________.
[1]
F-2-37
3) Affix the Staple label [1] to the inside of the front
cover.
[1]
F-2-38
2-14
FU5-8941
4) For Saddle Finisher AB2 (product for China,
Korea and Taiwan), affix the LED lamp label [2]
on the label [1] found in the saddle lower inner
cover.
0016-1445
5) Open the upper cover to pull the shift guide [1] to
the direction of [A].
[1]
[1]
F-2-39
[A]
F-2-40
[2]