Canon Finisher-AB1 Service Manual page 309

6) Remove the cable retainer [1], and disconnect the
connector [2]; then, free the cable [3] from the
cable guide [4].
[1]
F-4-57
7) Insert a screwdriver [1] into the hole [1].
F-4-58
8) Loosen the screw [1], and tighten the screw while
the tension is removed.
[1] [2]
F-4-59
9) Detach the belt [1] from the gear [2].
[4]
[2]
[3]
10) Remove the 2 slide shafts [1] in the direction of
[1]
[2]
11) Detach the shift assembly [1] in the direction of
When detaching the shift assembly, take care not to
hit the clamp [2].
[1] [2]
F-4-60
the arrow.
- 2 screws [2]
F-4-61
the arrow.
Chapter 4
[1]
4-15