Jam Codes - Canon Finisher-AB1 Service Manual

6.1 Jam Codes

6.1.1 Jam Codes
Code Jam type
1002 Inlet sensor delay jam PS3
1103 Inlet sensor stationary
jam
1004 Shift unit sensor delay
jam
1105 Shift unit sensor
stationary jam
1006 Buffer path 1 sensor
delay jam
1107 Buffer path 1 sensor
stationary jam
1008 Buffer path 2 sensor
delay jam
1109 Buffer path 2 sensor
stationary jam
100A Upper delivery sensor
delay jam
110B Upper delivery sensor
stationary jam
100E Lower delivery sensor
delay jam
110F Lower delivery sensor
stationary jam
100C Lower path sensor
delay jam
110D Lower path sensor
stationary jam
1320 Residual jam (at
power ON)
1721 Residual jam (at the
initial rotation)
1422 Door open
T-6-1
Sensor Jam condition
In a case that the inlet sensor (PS3) does not detect a paper after the specified
time (distance) has been passed from the delivery signal reception from the
connected equipment.
PS3 In a case that a paper does not pass through the inlet sensor (PS3) even
feeding it for the specified time (distance) after the sensor detects it.
PS4 In a case that the shift unit sensor (PS4) does not detect a paper even feeding
it for the specified time (distance) after the inlet sensor (PS3) detects it.
PS4 In a case that a paper does not pass through the shift unit sensor (PS4) even
feeding it for the specified time (distance) after the inlet sensor (PS3) detects
it.
UN13 In a case that the buffer path 1 sensor (UN13) does not detect a paper even
feeding it for the specified time (distance) after the shift unit sensor (PS4)
detects it.
UN13 In a case that a paper does not pass through the buffer path 1 sensor (UN13)
even feeding it for the specified time (distance) after the shift unit sensor
(PS4) detects it.
UN14 In a case that the buffer path 2 sensor (UN14) does not detect a paper even
feeding it for the specified time (distance) after the shift unit sensor (PS4)
detects it.
UN14 In a case that a paper does not pass through the buffer path 2 sensor (UN14)
even feeding it for the specified time (distance) after the shift unit sensor
(PS4) detects it.
PS5 In a case that the upper delivery sensor (PS5) does not detect a paper even
feeding it for the specified time (distance) after the buffer path 2 sensor
(UN14) detects it.
PS5 In a case that a paper does not pass through the upper delivery sensor (PS5)
even feeding it for the specified time (distance) after the buffer path 2 sensor
(UN14) detects it.
PS6 In a case that the lower delivery sensor (PS6) does not detect a paper even
feeding it for the specified time (distance) after the buffer path 2 sensor
(UN14) detects it.
PS6 In a case that a paper does not pass through the lower delivery sensor (PS6)
even feeding it for the specified time (distance) after the buffer path 2 sensor
(UN14) detects it.
UN24 In a case that lower path sensor (UN24) does not detect a paper even feeding
it for the specified time (distance) after the buffer path 2 sensor (UN14)
detects it.
UN24 In a case that a paper does not pass through the lower path sensor (UN24)
even feeding it for the specified time (distance) after the buffer path 2 sensor
(UN14) detects it.
In a case that there is a residual paper in the feeding area when turning on
the power.
In a case that there is a residual paper in the feeding area during the initial
rotation of the host machine.
MSW1 In case of detecting cover opening of the front cover switch (MSW1) during
the operation.
Chapter 6
6-1