Other; Service Mode (By Dip Switch)<Incerter - Canon Finisher-AB1 Service Manual

5.3.3 Other

5.3.3.1 Service Mode (by DIP switch)<Incerter>
The machine is equipped with a set of service mode items used to adjust it or to run checks on operation. The
items may be executed from the machine or from its host machine.
- From the Inserter
See Maintenance>VR, LED, and Check Pins>DIP Switch.
- From the Finisher
1) Open the finisher front cover; then, remove the screw [1] and the cover [2].
2) Make adjustments and checks using the DIP switch [3] (SW382) and the push switch [4] (SW383/SW384/
SW385) found on the service PCB I.
[2]
[1]
[3]
SW382
SW381
SW383
(-)
F-5-179
Chapter 5
SW384 SW385
(+) ENTER
[4]
0015-2245
5-53