Document Feeding System; Engaging Roller - Canon Finisher-AB1 Service Manual

Chapter 4
Unite the guide side [3] of a guide lever (before) [1]
and a guide lever (after) [2]. After that, it is a belt
[4]. Two pieces are attached.
[3]
[2]
[2]
F-4-78
4-20
[1]
[3]
[4]
[1]

4.4 Document Feeding System

4.4.1 Engaging Roller

4.4.1.1 Before Removing the Shift Roller
1) Remove the saddle stapler unit. (page 4-
8)Reference[Removing the Saddle Stapler Unit]
2) Remove the saddle inside cover (lower). (page 4-
6)Reference[Removing the Saddle Inside Cover
(lower)]
4.4.1.2 Removing the Shift Roller
1) Remove the resin ring [1] and the ball bearing [2].
F-4-79
2) Detach the belt [1] found at the rear of the saddle
assembly from the gear [2].
F-4-80
0015-2161
0015-2162
[1]
[2]
[1]
[2]