Canon Finisher-AB1 Service Manual page 150

Chapter 5
4) Turn on the power of the finisher.
5) Turn on the power switch on the host machine to
set the host machine to the standby mode.
6) Open the front door, and insert the door switch
actuator into the door switch [1].
F-5-146
7) Remove the screw [2] to detach the switch cover
[1].
[2]
F-5-147
8) Pull out the saddle unit [2] by holding the lever
[1]; and then, open the saddle right guide [3].
5-44
[1]
[2]
[1]
[1]
9) Place the sheets (A3 or LDR) [1] along the feeding
guide [2]. (Push the sheets in until they come into
contact with the positioning plate.)
[3]
F-5-148
[2] [1]
F-5-149