Canon Finisher-AB1 Service Manual page 338

Chapter 4
3) Pull out an auxiliary caster [1] in the direction of
an arrow [A]. Then, a saddle unit is pulled out in
the direction of an arrow [B].
[B]
F-4-170
4) Pull out the rail stopper[1].
F-4-171
5) Remove a cable guide [1] from a saddle unit.
Then, a saddle unit [2] is pulled out.
- 3 conectors [2]
- screw [3]
4-44
[A]
[1]
[1]
[1]
[3]
F-4-172
6) Remove the saddle inside cover (lower). (page 4-
6)Reference[Removing the Saddle Inside Cover
(lower)]
7) Remove the
38)Reference[Removing the Press Unit]
4.4.16.2 Removing the Folding Roller
1) Remove the transport roller guide [1].
- 1 screw [2]
[2] [1]
F-4-173
(page
press unit.
[2]
4-
0015-2191