Canon Finisher-AB1 Service Manual page 335

5) Disconnect the 3 connectors [1], and remove the
screw [2]; then, slide out the saddle unit in the
direction of the arrow.
[1]
[3]
F-4-159
6) Remove the saddle inside cover (lower). (page 4-
6)Reference[Removing the Saddle Inside Cover
(lower)]
4) Remove the
38)Reference[Removing the Press Unit]
(page
press unit.
4.4.15.2 Removing the Press Roller Unit
1) Remove the delivery guide (upper) [1].
- 4 screws [2]
[1]
[2]
[2]
2) Remove the handle cover [1].
- 1 screw [2]
4-
[2]
Chapter 4
F-4-160
[1]
F-4-161
0015-2189
[2]
4-41