Chapter 5
5.6 Variable Resistors (VR), Light-Emitting Diodes (LED), and Check
Pins by PCB
5.6.1 Overview
Of the LEDs and check pins used in the machine, those needed during servicing in the field are discussed.
Do not touch the check pins not found in the list herein. They are exclusively for factory use, and require
special tools and a high degree of accuracy.
5.6.2 Finisher Controller PCB
Switch
SW1
5.7 Upgrading
5.7.1 Upgrading
Perform upgrade of this machine by connecting a copy machine.
Refer to the service manual of imagePRESS C7000 Series for a detailed procedure.
5-88
Switch function
Use to the upgrading
F-5-224
T-5-24
0015-2261
0015-2260
0015-2262