Canon Finisher-AB1 Service Manual page 103

2) Disconnect the 2 connectors [1], and remove the 2
screws [2].
[1]
[2]
F-4-117
3) Remove the detection drive assembly [1].
- 2 screws [2]
[2]
F-4-118
[1]
4) Disconnect the connector [1], and free the cable
[2] from the 3 cable guides [3] and the edge
saddle [4].
5) Remove the 2 screws [5].
[5]
[4]
F-4-119
6) Remove the horizontal registration sensor unit [1]
in the direction of the arrow. (page 5-
8)Reference[Adjusting the Sensor Intensity]
[1]
F-4-120
Chapter 4
[2]
[3]
4-31
[1]