Saddle Disengage Roller Position Adjustment - Canon Finisher-AB1 Service Manual

Chapter 5
5.3.2.27 Saddle disengage roller position
adjustment
This adjustment is to be carried out when there is a
noticeable misalignment in the folding position or
stapling position.
<MEMO>
This operation adjusts the size of the gap between the
disengage roller and the paper, and improved paper
feed performance in the saddle assembly.
M102
F-5-187
5-56
[1]
Details of the adjustment method are as described
below.
1) Turn the finisher power ON.
0016-6915
2) Turn on the host machine power switch and put
the copier in standby.
3) Open the front door and insert the door switch
actuator into the door switch [1].
4) Remove the screw [2] to detach the switch cover
[1].
F-5-188
[1]
[2]
F-5-189
[1]