Connecting With High-Capacity Stacker - Canon Finisher-AB1 Service Manual

Chapter 2
7) Attach the rear small cover.
8) Remove 1 screw [1] on the rear lower cover of the
finisher.
F-2-11
9) Connect the shunt cable [1].
- 1 screw (User the ones removed in step 8).
- 1 screw (Use the included screw for the
finisher.)
[2]
F-2-12
2.2.4 Connecting with High-Capacity
Stacker
Check the power on the host machine is surely
turned off and the power supply cable is
unplugged.
2-6
1) Attach the front [1] and rear [2] latch plates to the
left side of the high-capacity stacker.
- 4 screws (RS tight; M4X10)
Confirm the mark engraved on each latch
plate when attaching.
Front [1]: F
Rear [2]: R
[1]
[3]
[1]
0016-0904
R
[2]
[2]
[3] [1]
F-2-13
F
[1]