Saddle Staple Position Adjustment - Canon Finisher-AB1 Service Manual

5.3.2.24 Saddle staple position adjustment

This adjustment is to be carried out when there is a
noticeable misalignment of the folding position with
the stapling position.
<MEMO>
This operation adjusts the length of the paper feed
time just before the folding operation is carried out.
(Adjusts Mxxxx rotation time.)
The adjustment prevents lack of feed caused by
slippage of the disengage roller, so that the defect
described above does not occur.
[1]
F-5-171
Details of the adjustment method are as described
below.
1) Turn the finisher power ON.
2) Turn on the host machine power switch and put
the copier in standby.
3) Open the front door and insert the door switch
actuator into the door switch [1].
0016-6929
M101
4) Remove the screw [2] to detach the switch cover
5) Set dipswitch DIP SW382 [1] on the switch PCB
F-5-172
[1].
[1]
[2]
F-5-173
as illustrated below.
[1]
SW382
SW381
SW383 SW384 SW385
(-) (+) ENTER
F-5-174
Chapter 5
[1]
5-51