Saddle Inside Cover - Canon Finisher-AB1 Service Manual

Chapter 4
4.2.6.3 Mounting the Stacking Wall (lower)
1) Turn the shutter drive shaft [2] so that the shutter
drive roll [1] is directly below.
[1]
F-4-20
2) Mount the stacking wall (lower) so that the shutter
drive roll [1] is visible through the hole in the
stacking wall.
F-4-21
4-6

4.2.7 Saddle Inside Cover

4.2.7.1 Removing the Side Inside Cover
0015-2115
(upper)
1) Open the front cover.
2) Remove the saddle inside cover (upper) [1].
- 2 knobs [2]
- 2 screws [3]
[2]
4.2.7.2 Removing the Saddle Inside Cover
(lower)
[1]
1) Remove the front cover.
2) Remove the saddle inside cover (lower) [1].
- 4 screws [2]
- 1 knob [3]
[2]
[1]
F-4-22
[3]
F-4-23
0015-2116
[2]
[1]
[3]
0015-2117
[2]