Motor; Removing The Stapler Shift Motor (M7) - Canon Inner Finisher-J1 Service Manual

Motor

Removing the Stapler Shift
Motor (M7)
■ Preparation
1. Remove this machine from the host machine.
"Removing this Machine from the Host Machine" on
page 43
2. Remove the Front Cover
Cover Unit" on page 54
3. Remove the Rear Cover."Removing the Rear Cover"
on page 54
4. Remove the Delivery
Tray" on page 54
5. Remove the Upper Feed Guide
Upper Feed Guide Unit" on page 57
6. Remove the Tray Guide
Guide Cover" on page 55
7. Remove the Staple-free Staple
Staple-free Staple Unit" on page 63
8. Remove the Processing Tray
Processing Tray Unit" on page 58
■ Procedure
1. Remove the Stapler Shift Motor [1].
• 2 Screws [2]
• 1 Connector [3]
2x
1x
Unit."Removing the Front
Tray."Removing the Delivery
Unit."Removing the
Cover."Removing the Tray
Unit."Removing the
Unit."Removing the
[3]
[2]
[2]
[1]
65
4. Disassembly/Assembly