Paddle Unit; Paddle; Tray Unit - Canon Finisher-AB1 Service Manual

Chapter 4

4.4.5 Paddle Unit

4.4.5.1 Before Removing the Paddle Unit
1) Remove the stacking wall (upper). (page 4-
5)Reference[Removing
(upper)]
2) Remove the stacking wall (lower). (page 4-
5)Reference[Removing
(lower)]
3) Remove the handling tray unit. (page 4-
20)Reference[Removing the Handling Tray
Unit]
4.4.5.2 Removing the Paddle Unit
1) Remove the 3 paddle units [1].
- 3 screws [2]
F-4-92

4.4.6 Paddle

4.4.6.1 Before Removing the Paddle
1) Remove the stacking wall (upper). (page 4-
5)Reference[Removing
(upper)]
2) Remove the stacking wall (lower). (page 4-
5)Reference[Removing
(lower)]
3) Remove the handling tray unit. (page 4-
20)Reference[Removing the Handling Tray
Unit]
4) Remove the

paddle

24)Reference[Removing the Paddle Unit]
4-24
0015-2172
the Stacking Wall
the Stacking Wall
0015-2173
[1]
[2]
0015-2174
the Stacking Wall
the Stacking Wall
unit. (page
4.4.6.2 Removing the Paddle
1) Release the 2 claws [1], and detach the paddle
retaining roll [2] to detach the paddle [3].
[1]

4.4.7 Tray Unit

4.4.7.1 Before Removing the Tray A/B Unit
1) Remove the upper rear cover (right). (page 4-
2)Reference[Removing the Upper Rear Cover
(right)]
2) Remove the upper rear cover (left). (page 4-
3)Reference[Removing the Upper Rear Cover
(left)]
3) Open the front cover.
4) Open the upper cover unit.
4.4.7.2 Removing the Tray A/B Unit
MEMO:
If the tray B unit must be removed, remove the tray
A unit first.
4-
[2]
[3]
[1]
F-4-93
0015-2175
0015-2176
0015-2177