Canon Finisher-AB1 Service Manual page 22

3) While lifting up the front latch plate [1], fit the
positioning pin on the machine side [2] to the
finisher's positioning hole [3]. Connect the
finisher with the machine.
<Front side>
[1]
<Rear side>
[2]
F-2-7
[3]
F-2-8
4) Fix the front latch retainer.
- 1 screw [2] (Use the screw removed in the step
2 of "Before Installing Finisher")
[2]
5) Shut the front cover of the finisher.
6) Lift up the rear latch plate [1] to fit the pin and fix
it.
- 1 screw [2] (Use the screw removed in the step
4 of "Before Installing Finisher")
[1]
F-2-10
Chapter 2
F-2-9
[2]
[1]
2-5