Upper Cover Unit - Canon Finisher-AB1 Service Manual

4.2.2.2 Before Removing the Upper Rear
Cover (left)
1) Remove the upper rear cover (right). (page 4-
2)Reference[Removing the Upper Rear Cover
(right)]
4.2.2.3 Removing the Upper Rear Cover
(left)
1) Remove the upper rear cover (left) [1].
- 4 screws [2]
[2]
[2]

4.2.3 Upper Cover Unit

4.2.3.1 Before Removing the Upper Cover
Unit
2) Remove the upper rear cover (right). (page 4-
2)Reference[Removing the Upper Rear Cover
(right)]
3) Remove the upper rear cover (left). (page 4-
3)Reference[Removing the Upper Rear Cover
(left)]
4) Remove the middle rear cover. (page 4-
7)Reference[Removing the Middle Rear Cover]
[1]
F-4-9
4.2.3.2 Removing the Upper Cover Unit
1) Disconnect the cable [1].
- 4 clamps [1]
0015-2106
- 1 connector [3]
- 2 screws [4]
- 1 edge saddle [5]
0015-2107
[2]
2) Open the front cover [1].
3) Remove the 2 screws [1], and detach the shaft
retaining plate [2].
0015-2109
Chapter 4
[5]
[3] [1]
F-4-10
F-4-11
0015-2110
[4]
[2]
[2]
[1]
4-3