Stack Wall (Upper); Stack Wall (Lower) - Canon Finisher-AB1 Service Manual

4.2.5 Stack Wall (Upper)

4.2.5.1 Removing the Stacking Wall
(upper)
1) While supporting the tray from below, insert a
screwdriver [2] in the hole [1] of the lower face to
release the roll [3] in the direction of the arrow;
then, lower the tray until it is free of the stacking
wall (upper).
F-4-16
2) Remove the stacking wall (upper) [1].
- 4 screws [2]
[2]
F-4-17
[3]
[2] [1]

4.2.6 Stack Wall (Lower)

4.2.6.1 Before Removing the Stacking
Wall (lower)
0015-2112
1) Remove the stacking wall (upper). (page 4-
5)Reference[Removing
(upper)]
4.2.6.2 Removing the Stacking Wall
(lower)
1) Open the front cover.
2) Remove the stopper (lower) [1].
- Screw [1]
[2]
[1]
3) Move up the tray A and the tray B above the
stacking wall (lower).
4) Lower the shutter [1], and remove the 2 screws
[2].
5) Detach the stacking wall (lower) [3].
- Remove the 4 screws [4].
[2]
[1]
[1]
Chapter 4
the Stacking
F-4-18
[4]
[2]
F-4-19
0015-2113
Wall
0015-2114
[3]
4-5