Canon Finisher-AB1 Service Manual page 332

Chapter 4
4) Pull out the rail stopper[1].
F-4-147
5) Remove a cable guide [1] from a saddle unit.
Then, a saddle unit [2] is pulled out.
- 3 conectors [2]
- screw [3]
[1]
[3]
F-4-148
4-38
[1]
[2]
6) Remove rhe sadddle inside cover (lower). (page
4-6)Reference[Removing the Saddle Inside
Cover (lower)]
4.4.14.2 Removing the Press Unit
1) Remove the 2 roller fixing plates (front) [1].
- 4 screws [2]
[1]
F-4-149
2) Remove the 2 roller fixing plates (rear) [1].
- 4 screws [2]
[2]
F-4-150
0015-2187
[2]
[1]