4
Parts Replacement and Cleaning Procedure > Motors > Removing the Tray 1 Shift Motor (M105)
Removing the Tray 1 Shift Motor (M105)
1) Remove the 7 screws and remove the tray 1 upper cover.
x4
3) Remove the connector, 2 screws and then the tray 1 shift motor.
4
Parts Replacement and Cleaning Procedure > Motors > Removing the Tray 1 Shift Motor (M105)
x3
F-4-147
Caution:
The tray will fall with its own
weight after removing the motor.
Hold the tray with a hand before
releasing the motor from the drive
belt.
F-4-150
2) Remove the 2 screws and remove the tray motor cover.
F-4-148
4-63
F-4-149
4-63