Process Tray Assembly - Canon Finisher-AB1 Service Manual

4.4.3 Process Tray Assembly

4.4.3.1 Before Removing the Handling
Tray Unit
1) Remove the stacking wall (upper). (page 4-
5)Reference[Removing
(upper)]
2) Remove the stacking wall (lower). (page 4-
5)Reference[Removing
(lower)]
4.4.3.2 Removing the Handling Tray Unit
1) Remove the handling bin (front) [1] and the
handling bin (rear) [2].
- 2 screws [3]
[1] [3]
F-4-89
2) Turn the knob [1] clockwise so that the rear edge
drop guide [2] is at its lowest position.
0015-2165
the Stacking Wall
the Stacking Wall
0015-2166
[2]
[2]
F-4-90
3) Remove the handling tray unit [1].
- 6 connectors [2]
- 4 screws [3]
[3]
[2]
F-4-91
Chapter 4
[A]
[1]
[1]
[3]
4-23