Canon Finisher-AB1 Service Manual page 289

Chapter 3
Jam
Saddle inlet sensor delay PS101
Saddle inlet sensor
stationary
Saddle small sensor
delay
Saddle small sensor
stationary
Saddle vertical path
sensor delay
Saddle vertical path
sensor stationary
Saddle pre-pressing
sensor delay
Saddle pre-pressing
sensor stationary
stitcher staple
Saddle stop plate
Saddle pressing home
position sensor delay
Saddle pressing home
position sensor
stationary
3-50
Sensor
The saddle inlet sensor (PS101) does not detect paper within a
specific period of time (distance) after the lower path sensor
(UN24) has detected paper.
PS101 The paper does not leave the saddle inlet sensor (PS101) within a
specific period of time (distance) after the lower path sensor
(UN24) has detected paper.
PS103 The saddle small sensor (PS103) does not detect paper within a
specific period of time (distance) after the saddle inlet sensor
(PS101) has detected paper.
PS103 The paper does not leave the saddle small sensor (PS103) within a
specific period of time (distance) after the saddle inlet sensor
(PS101) has detected paper.
PS105 The paper does not detect the saddle vertical path sensor (PS105)
within a specific period of time after the saddle stop plate operation
has been ended.
PS105 The paper does not leave the saddle vertical path sensor (PS105)
within a specific period of time after the saddle stop plate operation
has been started.
PS111 The saddle pre-pressing sensor (PS111) does not detect paper
within a specific period of time after the saddle stop plate operation
has been ended.
PS111 The paper does not leave the saddle pre-pressing sensor (PS111)
within a specific period of time after the end of saddle stop plate
operation.
SU The saddle stitcher unit does not detect the start-up of the stitcher
motor (M110) within a specific period of time.
PS110 The saddle stop plate sensor (PS110) does not detect the start-up of
the saddle motor stop plate motor (M106) within a specific period
of time.
PS113 The saddle pressing home position sensor (PS113) does not detect
the home position within a specific period of time after the start of
saddle stack delivery operation.
PS113 The saddle home position sensor (PS113) remains on (detects the
home position) at the start of saddle pressing operation.
T-3-3
Description Code
1042
1143
1044
1145
1046
1147
104A
114B
1550
1F52
1054
1155