Security
Dot1x
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Related Commands
Command
show dot1x
dot1x timeout server-timeout
Use this command to set the time that the switch waits for a response from the
authentication server. To return to the default setting, use the no form of this
command. The actual timeout is the smaller of this parameter or the product of the
RADIUS transmission and the RADIUS timeout.
dot1x timeout server-timeout seconds
no dot1x timeout server-timeout
Syntax Descriptions
Parameter
seconds
Default
seconds—30
Command Modes
Interface Config
Description
Shows a summary of the global 802. 1 X configuration,
summary information of the 802. 1 X configuration for a
specified port or all ports, the detailed 802. 1 X
configuration for a specified port, and the 802. 1 X statistics
for a specified port.
Description
The time that the switch waits for a response from the
authentication server. The range is 1–65535 seconds.
8
353