Show Ip Dhcp Snooping - Cisco Catalyst 3550 Command Reference Manual

Chapter 2 Cisco IOS Commands

show ip dhcp snooping

Use the show ip dhcp snooping privileged EXEC command to display the Dynamic Host Configuration
Protocol (DHCP) snooping configuration.
Syntax Description
This command has no arguments or keywords.
Command Modes
Privileged EXEC
Command History Release
12.1(19)EA1
Examples
This is an example of output from the show ip dhcp snooping command.
Switch#show ip dhcp snooping
Switch DHCP snooping is enabled
DHCP snooping is configured on following VLANs:
40-42
Insertion of option 82 is enabled
Interface
------------------------
FastEthernet0/5
FastEthernet0/7
FastEthernet0/3
FastEthernet0/5
FastEthernet0/7
FastEthernet0/5
FastEthernet0/7
Related Commands Command
show ip dhcp snooping
binding
78-11195-09
show ip dhcp snooping
Modification
This command was first introduced
Description
Displays the DHCP snooping binding information.
Trusted Rate limit (pps)
------- ----------------
yes unlimited
yes unlimited
no 5000
yes unlimited
yes unlimited
yes unlimited
yes unlimited
Catalyst 3550 Multilayer Switch Command Reference
show ip dhcp snooping
2-287